| Brand | Multibor |
|---|---|
| Coarseness | Medium |
| Bit shape | Cone |
| Coating | Without coating |
| Diameter of the working part | 5,0mm |
| Length of the working part | 14,0mm |
Professional Multibor carbide cone bit Ø5.0 mm with medium cross cut and WL 14.0 mm for controlled material removal, correction and surface refinement.
Data sheet
Specific References
The Multibor Carbide Cone Bit Ø5.0 mm Medium Cross Cut WL 14.0 mm is a professional carbide nail drill bit designed for controlled removal, correction and refinement of artificial nail material. Its tapered cone shape, Ø5.0 mm diameter, medium cross cut and 14.0 mm working length provide a balanced combination of cutting performance, accuracy and maneuverability.
The medium cross cut is suitable for reducing gel, acrylic, polygel and other artificial nail materials. It offers a more controlled action than a coarse carbide bit while removing material more efficiently than a fine-cutting version. This makes the bit practical for correction procedures, reducing the thickness of artificial coatings and shaping nail enhancements.
The cone shape gradually narrows toward the tip. The wider section is suitable for processing the main surface and reducing artificial material, while the narrower section provides access to transitions, lateral areas and smaller working zones. The Ø5.0 mm diameter offers stable handling, and the 14.0 mm working length provides a practical contact area for regular salon procedures.
This medium carbide manicure and pedicure bit is suitable for nail technicians who need a versatile e-file bit for gel removal, acrylic correction, artificial nail shaping and surface refinement. It can be used as the main correction bit or after a coarse bit to smooth and prepare the material for finer finishing.
The Multibor carbide cone bit is suitable for professional nail salons, manicure studios, pedicure practices and specialists working with electric nail drills. It can be integrated into structured procedures for artificial nail correction, gel and acrylic removal and professional nail preparation.
Speed, rotation direction and working pressure should be selected according to the material, procedure and professional technique. After every use, the bit should be cleaned, disinfected and sterilized according to the applicable professional hygiene requirements.
The Multibor Carbide Cone Bit Ø5.0 mm Medium Cross Cut WL 14.0 mm is a reliable choice for controlled gel and acrylic removal, correction of artificial nails and everyday professional e-file work.
Tungsten Carbide Bit Cylinder Ø6.6mm medium gold cross cut with WL 14.0mm working length. Designed for controlled removal and refinement of gel, acrylic and polygel.
The Tungsten Carbide Bit Cone Ø6.0 mm Coarse Cross Cut WL 14.5 mm is designed exclusively for left-handed users. It is suitable for fast and controlled removal of gel, acrylic, polygel and gel polish. The coarse cross cut provides high material removal performance and efficient salon work.
Tungsten carbide corn bit Ø6.0 mm Medium long cut with WL 14.5 mm working length. Designed for balanced removal of nail enhancement materials.
Tungsten carbide cone bit Ø5.0 mm fine cross cut with WL 14.5 mm working length. Designed for precise refinement and detailing.
Tungsten carbide cone bit Ø7.0 mm Fine cross cut with WL 15.0 mm working length. Designed for precise and controlled refinement of nail enhancement materials.
Professional Multibor carbide cylinder bit Ø2.3 mm with medium cross cut and WL 14.0 mm for controlled correction, surface leveling and material refinement.
Professional tungsten carbide cone bit Ø6.0 mm with Extra Coarse Super Cut cross cut and 14.6 mm working surface. Designed for extremely fast removal of gel, acrylic and hard enhancements. High cutting efficiency and stable salon performance.
Tungsten carbid bit cylinder Ø2.3 mm coarse cross cut with WL 14.0 mm working length. Designed for controlled and efficient removal of gel, acrylic and polygel materials.
Professional Multibor carbide cone bit Ø5.0 mm with medium cross cut and WL 14.0 mm for controlled material removal, correction and surface refinement.
