Carbide Cone Bit Ø7.0 mm Double Coarse XXC Long Cut WL 15.0 mm

The Lnail Carbide Cone Bit Ø7.0 mm Double Coarse XXC Long Cut WL 15.0 mm is a professional carbide bit designed for very intensive removal and major correction of artificial nail materials.

Its combination of a Ø7.0 mm cone shape, Double Coarse XXC long cut and 15.0 mm working length creates a large active working area for fast reduction of substantial amounts of material.

Double Coarse XXC – enhanced coarse cutting grade

The designation XXC – Double Coarse identifies a particularly aggressive cutting grade developed for procedures where standard coarse cutting performance is not sufficient.

Compared with a conventional coarse cut, Double Coarse XXC is intended for faster bulk reduction of thick gel, acrylic, polygel and other artificial nail materials. It is especially useful during major corrections, removal of excessive thickness and rapid reduction of dense artificial structures.

This cutting grade is not intended primarily for final smoothing. Its purpose is high-performance material removal at the initial stage, after which the surface can be refined with a coarse, medium or fine carbide bit depending on the required result.

The long cut extends along the working head, providing a large active cutting zone and supporting productive treatment of larger artificial surfaces.

The cone shape gradually narrows toward the tip. The wider section is convenient for intensive work on large areas, while the tapered part allows better control when approaching transitions and smaller zones.

The Ø7.0 mm diameter provides a broad contact area, while the 15.0 mm working length further increases the usable working surface.

This XXC bit is intended primarily for experienced professionals who need a powerful tool for fast removal of artificial material.

Suitable applications include:

• intensive removal of gel, acrylic and polygel;
• rapid reduction of thick artificial material;
• major correction of artificial nail architecture;
• removal of excessive product volume;
• preliminary shaping before finer processing.

Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique. Due to the high cutting performance of the XXC grade, the bit should be used with smooth, controlled movements and without excessive pressure.

After every use, the instrument should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.

The Lnail Carbide Cone Bit Ø7.0 mm Double Coarse XXC Long Cut WL 15.0 mm is a high-performance professional tool for situations where maximum efficiency in removing large amounts of artificial nail material is required.