| Brand | Lnail Precision |
|---|---|
| Coarseness | Extra Fine |
| Bit shape | Corn |
| Coating | Without coating |
| Diameter of the working part | 6,0mm |
| Length of the working part | 14,5mm |
Tungsten carbide corn bit Ø6.0 mm Extra fine gold long cut with WL 14.5 mm working length. Designed for precise refinement and smoothing.
Data sheet
Specific References
The Lnail Carbide Corn Bit Ø6.0 mm Extra Fine Long Cut WL 14.5 mm is an uncoated professional nail drill bit designed for precise correction, smoothing and finishing of artificial nail materials.
The combination of the corn shape, Ø6.0 mm diameter, extra fine long cut and 14.5 mm working length provides a broad working surface and controlled material processing.
The extra fine cut is suitable for delicate correction and finishing after the main material reduction. It can be used for smoothing gel, acrylic, polygel and other artificial nail materials, refining transitions and preparing the surface for the next stage of the procedure.
The long cut extends along the working head and supports smooth, even and controlled processing of artificial material.
The corn shape combines a wider central section with a gradually tapered end. The main working surface is convenient for processing larger areas of the artificial nail, while the narrower end helps with accurate work on transitions and smaller zones.
The Ø6.0 mm diameter provides a broad contact area for efficient and even processing. The 14.5 mm working length offers an extended working zone for professional procedures.
The bit has no additional coating, leaving the carbide surface in its standard finish.
It is suitable for professional manicure and pedicure procedures, nail salons and specialists using electric nail drills. The bit can be used for correction, smoothing, finishing and preparation of artificial nail material.
Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique. Use controlled movements without excessive pressure.
After every use, the bit should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
The Lnail Carbide Corn Bit Ø6.0 mm Extra Fine Long Cut WL 14.5 mm is a professional tool for precise finishing, smooth correction and controlled processing of artificial nail materials.
Professional Multibor carbide corn bit Ø6.0 mm with coarse cross cut and WL 15.0 mm for efficient removal and correction of artificial nail material.
Professional Multibor carbide cone bit Ø6.0 mm with extra coarse cross cut and WL 15.0 mm for rapid removal of thick artificial nail material.
Tungsten Carbide Bit Cylinder Ø6.0mm coarse cross cut with WL 13.0mm working length. Designed for fast and controlled removal of gel, acrylic and polygel during professional nail treatments.
Tungsten Carbide Bit Cylinder Ø5.0mm medium cross cut with WL 13.0mm working length. Ideal for controlled removal of gel, acrylic and polygel and for refining artificial nail structures.
Tungsten Carbide Bit Cylinder Ø5.0mm fine cross cut with WL 13.0mm working length. Designed for controlled refinement and smoothing of gel, acrylic and polygel surfaces.
Tungsten carbide cone bit Ø7.0 mm Extra Coarse cross cut with WL 15.0 mm working length. Ideal for aggressive removal of nail enhancement materials.
Tungsten Carbide Bit Cylinder Ø6.6mm medium DLC cross cut with WL 14.0mm working length. Designed for controlled removal and refinement of gel, acrylic and polygel.
The Tungsten Carbide Bit Cone Ø6.0 mm Coarse Cross Cut Gold WL 13.0 mm is designed exclusively for left-handed users. It is suitable for fast and controlled removal of gel, acrylic, polygel and gel polish. The coarse cross cut provides high material removal performance, while the Gold coating protects the surface and gives the tool a professional appearance.
The Diamond Bit Cone Ø5.0 mm Blue Ring is designed for professional manicure procedures and precise treatment of the nail plate.
The blue ring indicates medium grit, providing balanced abrasive performance suitable for controlled nail work.
Tungsten carbide flame bit Ø6.0 mm Extra fine DLC long cut with WL 14.6 mm working length. Designed for precision finishing and smoothing.
Tungsten carbide flame bit Ø6.0 mm Fine DLC long cut with WL 14.6 mm working length. Designed for precise refinement and smoothing.
Tungsten carbide flame bit Ø6.0 mm Medium DLC long cut with WL 14.6 mm working length. Designed for balanced material removal and shaping.
The Diamond Bit Cone Ø5.0 mm Red Ring is designed for professional manicure procedures and delicate treatment of the nail plate.
The red ring indicates fine grit, providing gentle abrasive performance suitable for precise nail work.
Tungsten carbide corn bit Ø6.0 mm Extra fine gold long cut with WL 14.5 mm working length. Designed for precise refinement and smoothing.
