| Brand | Lnail Precision |
|---|---|
| Coarseness | Medium |
| Bit shape | Cone |
| Coating | Without coating |
| Diameter of the working part | 7,0mm |
| Length of the working part | 15,0mm |
Professional Lnail carbide cone bit Ø7.0 mm with medium long cut and WL 15.0 mm for controlled material removal, correction, shaping and smoothing.
Data sheet
The Lnail Carbide Cone Bit Ø7.0 mm Medium Long Cut WL 15.0 mm is a professional nail drill bit designed for correction, shaping and smoothing of artificial nail materials.
The combination of the cone shape, Ø7.0 mm diameter, medium long cut and 15.0 mm working length provides a broad working surface and balanced material removal for productive professional procedures.
The medium cut is suitable for working with gel, acrylic, polygel and other artificial nail materials. It provides efficient material reduction while maintaining good control during correction and surface refinement.
The long cut extends along the working head and supports even processing over a large contact area. It is suitable for reducing excess material, correcting the architecture of artificial nails, smoothing transitions and preparing the surface for further finishing.
The cone shape gradually narrows toward the tip. The wider section provides efficient contact when processing larger areas, while the tapered end helps with more controlled work on transitions and smaller zones.
The Ø7.0 mm diameter creates a broad working area for productive material processing. The 15.0 mm working length provides an extended active zone, making the bit convenient for larger artificial nail surfaces.
The bit is suitable for professional manicure and pedicure procedures, nail salons and specialists using electric nail drills. It can be used for artificial coating correction, shaping, smoothing and preparation for subsequent processing.
Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique. Use smooth, controlled movements without excessive pressure.
After every use, the bit should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
The Lnail Carbide Cone Bit Ø7.0 mm Medium Long Cut WL 15.0 mm is a professional tool for efficient and controlled correction, shaping and smoothing of artificial nail materials.
Carbide bit cylinder Ø5.0mm coarse cross cut with WL 13.0mm working length. The straight cylinder shape ensures stable contact with the nail surface and allows fast removal of gel, acrylic and polygel materials.
Professional tungsten carbide flame bit Ø6.0 mm Coarse with cross cut, DLC coating, AL 16.0 mm and L/R design. Engineered for efficient removal of gel, acrylic and polygel enhancements while maintaining stable control.
Tungsten Carbide Bit Cylinder Ø6.6mm medium DLC cross cut with WL 14.0mm working length. Designed for controlled removal and refinement of gel, acrylic and polygel.
Professional Multibor carbide corn bit Ø5.0 mm with extra coarse cross cut and WL 14.0 mm for rapid removal of thick gel, acrylic and artificial nail material.
Tungsten carbide hollow bit Ø2.3 mm designed for precise and controlled work on nail enhancements.
Professional Multibor carbide cone bit Ø1.6 mm with medium cross cut and WL 6.0 mm for precise correction, local material reduction and detailed refinement.
Professional Multibor carbide cone bit Ø5.0 mm with coarse cross cut and WL 14.0 mm, designed exclusively for left-handed technicians.
Professional Lnail carbide cone bit Ø7.0 mm with coarse long cut and WL 15.0 mm for intensive removal, correction and shaping of artificial nail material.
Professional Lnail carbide cone bit Ø7.0 mm with medium long cut and WL 15.0 mm for controlled material removal, correction, shaping and smoothing.
