| Brand | F-Freza |
|---|---|
| Coarseness | Medium |
| Bit shape | Corn |
| Coating | Without coating |
| Diameter of the working part | 6,0mm |
| Length of the working part | 14,0mm |
Professional F-Freza carbide corn bit Ø6.0 mm with medium cross cut and WL 14.0 mm for controlled removal, correction, shaping and smoothing of artificial nail material.
Data sheet
The F-Freza Carbide Corn Bit Ø6.0 mm Medium Cross Cut WL 14.0 mm is a professional carbide nail drill bit designed for controlled removal, correction and shaping of artificial nail materials.
The combination of the corn shape, Ø6.0 mm diameter, medium cross cut and 14.0 mm working length provides balanced cutting performance and a broad working surface for regular professional procedures.
The medium cross cut is suitable for gel, acrylic, polygel and other artificial nail materials. It provides efficient material removal while maintaining good control during correction and shaping.
The bit can be used to reduce artificial material thickness, remove excess product, correct artificial nail architecture, smooth the surface and refine transitions.
The corn shape combines a wider central working area with a gradually tapered end. The broad section is convenient for processing larger surfaces, while the narrower end allows more accurate work on transitions and smaller areas.
The Ø6.0 mm diameter provides a practical contact area for efficient processing. The 14.0 mm working length offers an extended active zone for professional use.
The medium cutting grade makes this bit a versatile choice for everyday salon procedures where effective material removal and controlled processing are required.
Typical applications include:
Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique. Use smooth, controlled movements without excessive pressure.
After every use, the instrument should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
The F-Freza Carbide Corn Bit Ø6.0 mm Medium Cross Cut WL 14.0 mm is a versatile professional tool for controlled removal, correction and shaping of artificial nail materials.
Tungsten carbide safety cone bit Ø6.0 mm Fine cross cut with WL 12.7 mm working length. The rounded safety tip reduces the risk of injury and allows controlled work close to the cuticle area.
Tungsten carbide ball bit Ø3.0 mm Fine cross cut with WL 3.0 mm working length. The spherical shape allows extremely precise detailing and controlled refinement of nail surfaces.
Tungsten carbide cone bit Ø4.0 mm Medium cross cut with WL 12.7 mm working length. Designed for balanced cutting performance and controlled removal of nail enhancement materials.
Tungsten carbide cone bit Ø4.0 mm Extra Coarse cross cut with WL 12.7 mm working length. Designed for rapid removal of nail enhancement materials.
Professional Multibor carbide cone bit Ø4.0 mm with coarse cross cut and WL 15.0 mm for efficient gel, acrylic and artificial nail material removal.
Professional Multibor carbide cone bit Ø5.0 mm with coarse cross cut and WL 14.0 mm, designed exclusively for left-handed technicians.
Professional Multibor carbide cone bit Ø6.0 mm with fine cross cut and WL 15.0 mm for controlled material removal, correction and surface refinement.
Professional Multibor carbide cone bit Ø2.0 mm with medium cross cut and WL 15.0 mm for precise correction, controlled material removal and surface refinement.
Professional F-Freza carbide corn bit Ø6.0 mm with medium cross cut and WL 14.0 mm for controlled removal, correction, shaping and smoothing of artificial nail material.
