| Brand | F-Freza |
|---|---|
| Coarseness | Coarse |
| Bit shape | Cone |
| Coating | Without coating |
| Diameter of the working part | 3,5mm |
| Length of the working part | 12,0mm |
Professional F-Freza carbide cone bit Ø3.5 mm with coarse cross cut and WL 12.0 mm for efficient removal, correction and shaping of artificial nail material.
Data sheet
The F-Freza Carbide Cone Bit Ø3.5 mm Coarse Cross Cut WL 12.0 mm is designed for professional processing of gel, acrylic, polygel and other artificial nail materials.
The combination of the cone shape, Ø3.5 mm diameter, coarse cross cut and 12.0 mm working length provides efficient material removal while maintaining good control.
The coarse cross cut is suitable for procedures where a larger amount of artificial material needs to be reduced efficiently. The bit can be used to remove excess product, reduce thickness, correct artificial nail architecture and shape the surface.
The cone shape gradually narrows toward the tip, providing a useful balance between cutting efficiency and precise handling. The relatively slim Ø3.5 mm diameter is convenient for smaller areas, narrow zones and transitions.
The 12.0 mm working length provides a practical active area for controlled professional work.
Typical applications include:
removal of gel, acrylic and polygel;
reducing excess artificial material;
correction of artificial nail architecture;
shaping artificial nails;
processing smaller and narrow areas;
preparation for finer finishing.
The coarse cutting grade is intended for stronger material removal and is especially useful for correction procedures where a significant amount of product needs to be reduced.
Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique. Use smooth, controlled movements without excessive pressure.
After every use, the instrument should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
Tungsten carbide typhoon bit Ø6.0 mm Fine long cut with WL 14.5 mm working length. Designed for precise and controlled refinement of nail enhancement materials.
The Tungsten Carbide Bit Cone Ø4.0 mm Extra Coarse Cross Cut WL 14.5 mm is designed for aggressive and highly efficient removal of gel, acrylic, polygel and gel polish. The extra coarse cross cut provides maximum cutting performance, while the cone shape ensures controlled work on larger nail surfaces and around the nail plate.
Tungsten carbide typhoon bit Ø6.0 mm Extra Coarse long cut with WL 14.5 mm working length. Ideal for aggressive and fast removal of nail enhancement materials.
Tungsten carbide ball bit Ø7.0 mm cross cut with WL 7.0 mm working length. Designed for precise and controlled material removal.
Tungsten Carbide Bit Cone Ø2.3mm extra fine cross cut with WL 15.0mm working length. Designed for delicate finishing work and precise refinement of artificial nail structures.
Tungsten Carbide Bit Cylinder Ø6.6mm medium gold cross cut with WL 12.7mm. Universal L/R rotation compatible for efficient removal of gel, acrylic and polygel.
Tungsten carbide cone bit Ø6.6 mm Extra Coarse cross cut with WL 12.7 mm working length. Ideal for aggressive removal of nail enhancement materials.
Tungsten carbide cone bit Ø4.0 mm extra fine cross cut with WL 14.5 mm working length. Designed for precision detailing.
Professional F-Freza carbide cone bit Ø3.5 mm with coarse cross cut and WL 12.0 mm for efficient removal, correction and shaping of artificial nail material.
