| Brand | Multibor |
|---|---|
| Coarseness | Fine |
| Bit shape | Cone |
| Coating | Without coating |
| Diameter of the working part | 5,0mm |
| Length of the working part | 14,0mm |
Professional Multibor carbide cone bit Ø5.0 mm with fine cross cut and WL 14.0 mm for controlled material removal, correction and surface refinement.
Data sheet
Specific References
The Multibor Carbide Cone Bit Ø5.0 mm Fine Cross Cut WL 14.0 mm is a professional rotary bit designed for controlled manicure and pedicure procedures. Its cone-shaped working head, Ø5.0 mm diameter, fine cross cut and 14.0 mm working length provide a practical combination of precision, efficiency and comfortable handling.
The fine cross cut supports controlled removal and refinement of artificial nail material. It is suitable for reducing gel and acrylic coatings, correcting the structure of nail enhancements and smoothing the surface after more intensive material removal. The crossed cutting pattern helps provide efficient performance while maintaining good control over the treated area.
The cone shape gradually narrows toward the tip. The wider section can be used for processing larger material areas, while the narrower section supports precise work on transitions, side zones and smaller sections. The Ø5.0 mm diameter offers good maneuverability, while the 14.0 mm working length provides a practical contact area for regular professional procedures.
This carbide bit is suitable for nail technicians who need a fine-cutting tool for correction, surface refinement and controlled finishing. It can also be used after a coarser bit to smooth the processed material and prepare the surface for the next stage of the service.
Speed, rotation direction and working pressure should be selected according to the material, procedure and professional technique. After every use, the bit should be cleaned, disinfected and sterilized according to the applicable professional hygiene requirements.
The Multibor Carbide Cone Bit Ø5.0 mm Fine Cross Cut WL 14.0 mm is a practical choice for professionals who value controlled cutting performance, precise handling and a versatile cone shape for everyday salon work.
Professional Multibor carbide cone bit Ø5.0 mm with coarse cross cut and WL 14.0 mm, designed exclusively for left-handed technicians.
Professional Multibor carbide cone bit Ø1.8 mm with medium cross cut and WL 8.0 mm for precise correction, local material reduction and detailed refinement.
Tungsten Carbide Bit Cylinder Ø2.3mm violet cross cut with WL 14.0mm working length. Designed for precise refinement, finishing work and delicate correction of gel, acrylic and polygel nails.
Tungsten carbide barrel bit Ø8.0 mm Coarse cross cut with WL 21.0 mm working length. Designed for fast removal of nail enhancement materials.
Professional Multibor carbide cone bit Ø6.0 mm with coarse cross cut and WL 15.0 mm for efficient gel, acrylic and artificial nail material removal.
Professional tungsten carbide cone bit Ø6.0 mm Extra Coarse with Super Cut cross cut, DLC coating and AL 14.6 mm. Designed for extremely fast removal of thick gel and acrylic enhancements. Reduced friction, less heat build-up and outstanding durability for intensive salon use.
Tungsten carbide volcano bit Ø7.0 mm Medium long cut with WL 15.0 mm working length. Designed for efficient and controlled refinement of nail enhancement materials.
Carbide bit cone Ø6.0mm coarse cross cut with WL 12.0mm working length. The tapered cone shape ensures excellent control and allows efficient removal of gel, acrylic and polygel materials during professional nail services.
Professional Multibor carbide cone bit Ø5.0 mm with fine cross cut and WL 14.0 mm for controlled material removal, correction and surface refinement.
