| Brand | F-Freza |
|---|---|
| Coarseness | Medium |
| Bit shape | Corn |
| Coating | Without coating |
| Diameter of the working part | 5,0mm |
| Length of the working part | 13,0mm |
Professional F-Freza carbide corn bit Ø5.0 mm with medium cross cut and WL 13.0 mm for controlled removal, correction, shaping and smoothing of artificial nail material.
Data sheet
The F-Freza Carbide Corn Bit Ø5.0 mm Medium Cross Cut WL 13.0 mm is a professional carbide nail drill bit designed for controlled removal, correction and shaping of artificial nail materials.
The combination of the corn shape, Ø5.0 mm diameter, medium cross cut and 13.0 mm working length provides balanced cutting performance and good maneuverability for regular professional procedures.
The medium cross cut is suitable for working with gel, acrylic, polygel and other artificial nail materials. It provides efficient material removal while maintaining good control during correction and shaping.
The bit can be used to reduce artificial material thickness, remove excess product, correct artificial nail architecture, smooth the surface and refine transitions.
The corn shape combines a wider central working area with a gradually tapered end. The main section is convenient for processing larger surfaces, while the narrower part supports more accurate work on transitions and smaller areas.
The Ø5.0 mm diameter offers a practical balance between working surface and maneuverability. The 13.0 mm working length provides a comfortable active zone for controlled professional work.
The medium cutting grade makes this bit a versatile choice for everyday salon procedures where effective material removal and precise control are both important.
Typical applications include correction of gel, acrylic and polygel, reduction of artificial material thickness, removal of excess product, shaping, smoothing transitions and preparation for finer finishing.
Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique. Use smooth, controlled movements without excessive pressure.
After every use, the instrument should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
The F-Freza Carbide Corn Bit Ø5.0 mm Medium Cross Cut WL 13.0 mm is a versatile professional tool for controlled correction and shaping of artificial nail materials.
Tungsten carbide typhoon bit Ø6.0 mm Fine long cut with WL 14.5 mm working length. Designed for precise and controlled refinement of nail enhancement materials.
Tungsten carbide corn bit Ø6.0 mm Fine cross cut with WL 14.5 mm working length. Designed for precise and controlled refinement of nail enhancement materials.
Professional tungsten carbide cone bit Ø6.0 mm with coarse Super Cut cross cut and 14.6 mm working surface. Designed for fast, controlled removal of gel, acrylic and hard materials. Smooth running, reduced heat build-up and efficient chip evacuation for intensive salon use.
Professional Multibor carbide cone bit Ø1.8 mm with medium cross cut and WL 8.0 mm for precise correction, local material reduction and detailed refinement.
Tungsten Carbide Bit Cone Ø2.3mm extra fine cross cut with WL 15.0mm working length. Designed for delicate finishing work and precise refinement of artificial nail structures.
Professional Multibor carbide cone bit Ø6.0 mm with medium cross cut and WL 15.0 mm for controlled material removal, correction and surface refinement.
Tungsten carbide typhoon bit Ø6.0 mm Medium long cut with WL 14.5 mm working length. Designed for balanced removal of nail enhancement materials.
Tungsten carbide corn bit Ø6.0 mm fine cross cut with WL 13.0 mm working length. Designed for controlled material refinement.
Professional F-Freza carbide corn bit Ø5.0 mm with medium cross cut and WL 13.0 mm for controlled removal, correction, shaping and smoothing of artificial nail material.
