| Brand | KMIZ |
|---|---|
| Coarseness | Extra Fine |
| Bit shape | Corn |
| Coating | Without coating |
| Diameter of the working part | 6,0mm |
| Length of the working part | 14,0mm |
Professional KMIZ carbide corn bit Ø6.0 mm with extra fine cross cut and WL 14.0 mm for precise correction, smoothing and finishing of artificial nail material.
Data sheet
The KMIZ Carbide Corn Bit Ø6.0 mm Extra Fine Cross Cut WL 14.0 mm is designed for precise professional processing of gel, acrylic, polygel and other artificial nail materials.
The combination of the corn shape, Ø6.0 mm diameter, extra fine cross cut and 14.0 mm working length provides especially smooth and controlled processing.
The extra fine cross cut is suitable for procedures where only a small amount of material needs to be removed. It is particularly useful for delicate correction, surface smoothing, refining transitions and preparing the material for the final finishing stage.
The corn shape provides a broad central working area and gradually tapers toward the end. This makes it convenient for smooth processing of larger surfaces while the narrower part allows more precise work on transitions.
The Ø6.0 mm diameter provides a stable working surface for controlled movements. The 14.0 mm working length offers a generous active zone for professional use.
Typical applications include:
fine correction of gel, acrylic and polygel;
surface smoothing;
refining transitions;
removal of small amounts of excess material;
refining artificial nail shape;
preparation for final finishing.
The extra fine cutting grade is not intended for intensive bulk removal. It is designed for gentle, precise and controlled processing of artificial materials.
Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique.
After every use, the instrument should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
Tungsten carbide ball bit Ø5.0 mm cross cut with WL 5.0 mm working length. Designed for precise and controlled material removal.
Tungsten carbide corn bit Ø1.6 mm Fine straight cut with WL 2.6 mm working length. Designed for precise detailing and controlled material refinement.
Tungsten carbide cone bit Ø2.3 mm coarse cross cut with WL 14.0 mm working length. The tapered shape allows precise control and efficient removal of gel, acrylic and polygel materials.
Tungsten carbide flame bit Ø2.3 mm fine cross cut with WL 8.0 mm working length. Designed for precise detailing and refinement.
Professional Multibor carbide corn bit Ø5.0 mm with medium cross cut and WL 14.0 mm for controlled removal, correction and shaping of artificial nail material.
Tungsten Carbide Bit Corn Ø6.0mm medium cross cut with WL 14.0mm working length. Designed for controlled removal and refinement of gel, acrylic and polygel during professional nail treatments.
Tungsten Carbide Bit Cylinder Ø6.6mm medium DLC cross cut with WL 14.0mm working length. Designed for controlled removal and refinement of gel, acrylic and polygel.
Tungsten carbide volcano bit Ø7.0 mm Medium long cut with WL 15.0 mm working length. Designed for efficient and controlled refinement of nail enhancement materials.
Professional KMIZ carbide corn bit Ø6.0 mm with extra fine cross cut and WL 14.0 mm for precise correction, smoothing and finishing of artificial nail material.
