| Brand | Multibor |
|---|---|
| Coarseness | Coarse |
| Bit shape | Cone |
| Coating | Without coating |
| Left-handed users | Suitable |
| Diameter of the working part | 5,0mm |
| Length of the working part | 14,0mm |
Professional Multibor carbide cone bit Ø5.0 mm with coarse cross cut and WL 14.0 mm, designed exclusively for left-handed technicians.
Data sheet
Specific References
The Multibor Carbide Cone Bit Ø5.0 mm Coarse Cross Cut WL 14.0 mm L is a professional nail drill bit designed exclusively for left-handed technicians. Its tapered cone shape, Ø5.0 mm diameter, coarse cross cut and 14.0 mm working length provide efficient cutting performance, precise access and controlled handling during artificial nail correction.
The coarse cross cut is suitable for rapid reduction of gel, acrylic, polygel and other artificial nail materials. The bit can be used to remove thicker coating layers, reduce excess product, correct nail enhancement architecture and prepare the surface for further refinement.
The cutting direction of this model is specially designed for left-handed use only. It should be operated exclusively in the designated left-hand working direction. It is not a universal bit for both right- and left-handed technicians.
The cone-shaped working head gradually narrows toward the tip. The wider section is suitable for reducing material on the main surface, while the narrower section provides access to transitions, lateral zones and smaller working areas. The Ø5.0 mm diameter offers good stability, while the 14.0 mm working length provides a practical contact area for regular professional procedures.
This coarse carbide manicure and pedicure bit is intended for experienced left-handed nail technicians who need an efficient e-file bit for gel removal, acrylic removal, polygel reduction and artificial nail correction. After the main material has been removed, the surface can be refined with a medium or fine carbide bit.
The Multibor left-handed carbide cone bit is suitable for professional nail salons, manicure studios, pedicure practices and specialists using electric nail drills. It can be integrated into structured procedures for artificial nail removal, nail enhancement correction and surface preparation.
The operating speed and pressure should be selected according to the material, procedure and professional technique. The bit must be used only in its designated left-hand direction. After every use, it should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
The Multibor Carbide Cone Bit Ø5.0 mm Coarse L WL 14.0 mm is a reliable professional choice for left-handed technicians who need efficient gel, acrylic and artificial nail material removal.
Tungsten carbide flame bit Ø8.0 mm Fine cross cut with WL 21.0 mm working length. Designed for precise and controlled refinement of nail materials.
Professional tungsten carbide flame bit Ø6.0 mm Coarse with cross cut, DLC coating, AL 16.0 mm and L/R design. Engineered for efficient removal of gel, acrylic and polygel enhancements while maintaining stable control.
Tungsten Carbide Bit Cone Ø2.3mm extra fine cross cut with WL 15.0mm working length. Designed for delicate finishing work and precise refinement of artificial nail structures.
The carbide cylinder bit Ø6.0mm Fine Reversible with WL 14.0mm and L/R teeth is designed for precise work in both forward and reverse rotation. Suitable for right- and left-handed technicians, it provides controlled material removal on gel, acrylic and polygel. The symmetrical cutting edges help reduce slipping, vibration and heat while improving comfort and efficiency during professional nail work.
The Tungsten Carbide Bit Cone Ø6.0 mm Coarse Cross Cut Gold WL 13.0 mm is designed exclusively for left-handed users. It is suitable for fast and controlled removal of gel, acrylic, polygel and gel polish. The coarse cross cut provides high material removal performance, while the Gold coating protects the surface and gives the tool a professional appearance.
Tungsten carbide corn bit Ø6.0 mm Extra Coarse long cut with WL 14.5 mm working length. Ideal for fast and efficient removal of nail enhancement materials.
Tungsten Carbide Bit Cylinder Ø5.0mm fine cross cut with WL 13.0mm working length. Designed for controlled refinement and smoothing of gel, acrylic and polygel surfaces.
Tungsten carbide strawberry bit Ø6.0 mm Coarse straight cut with WL 12.5 mm working length. Designed for efficient removal of nail enhancement materials.
Professional Multibor carbide cone bit Ø5.0 mm with coarse cross cut and WL 14.0 mm, designed exclusively for left-handed technicians.
