| Brand | Lnail Precision |
|---|---|
| Coarseness | Coarse |
| Bit shape | Cone |
| Coating | Without coating |
| Diameter of the working part | 7,0mm |
| Length of the working part | 15,0mm |
Professional Lnail carbide cone bit Ø7.0 mm with coarse long cut and WL 15.0 mm for intensive removal, correction and shaping of artificial nail material.
Data sheet
The Lnail Carbide Cone Bit Ø7.0 mm Coarse Long Cut WL 15.0 mm is a professional nail drill bit designed for intensive removal, correction and shaping of artificial nail materials.
The combination of the cone shape, Ø7.0 mm diameter, coarse long cut and 15.0 mm working length provides a large working surface and high material removal performance for productive professional procedures.
The coarse cut is suitable for efficient reduction of gel, acrylic, polygel and other artificial nail materials. It can be used to remove thicker layers, reduce excess product, correct artificial nail architecture and prepare the surface for subsequent finer processing.
The long cut extends along the working head and provides a large active cutting area for efficient and even material removal.
The cone shape gradually narrows toward the tip. The wider section is convenient for fast processing of larger surfaces, while the tapered end supports controlled work on transitions and smaller areas.
The Ø7.0 mm diameter provides a broad contact area for productive material removal. The 15.0 mm working length creates an extended active zone, making the bit particularly convenient for larger artificial nail surfaces.
This coarse carbide bit is suitable for experienced professionals who require an efficient tool for removing and correcting artificial material. After the main reduction, the surface can be refined with a medium or fine carbide bit.
The bit is suitable for professional manicure and pedicure procedures, nail salons and specialists using electric nail drills.
Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique. Work with smooth, controlled movements without excessive pressure.
After every use, the instrument should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
The Lnail Carbide Cone Bit Ø7.0 mm Coarse Long Cut WL 15.0 mm is a professional tool for intensive material removal, efficient correction and shaping of artificial nails.
Tungsten Carbide Bit Cylinder Ø6.0mm medium DLC cross cut with WL 14.0mm working length. Designed for controlled removal of gel, acrylic and polygel with improved durability thanks to DLC coating.
Professional Multibor carbide cone bit Ø4.0 mm with extra coarse cross cut and WL 15.0 mm for rapid removal of thick artificial nail material.
Professional tungsten carbide flame bit Ø6.0 mm Medium with cross cut, AL 16.0 mm and L/R design. Provides balanced cutting performance and excellent control for gel, acrylic and polygel refinements.
Tungsten carbide corn bit Ø6.0 mm fine cross cut with WL 13.0 mm working length. Designed for controlled material refinement.
Professional Multibor carbide corn bit Ø5.0 mm with medium cross cut and WL 14.0 mm for controlled removal, correction and shaping of artificial nail material.
Professional Multibor carbide cone bit Ø4.0 mm with fine cross cut and WL 15.0 mm for precise material removal, correction and surface refinement.
Tungsten carbide cylinder bit Ø6.6 mm Coarse cross cut with WL 12.7 mm working length. Designed for efficient removal and reduction of nail enhancement materials.
Tungsten Carbide Bit Cylinder Ø2.3mm violet cross cut with WL 14.0mm working length. Designed for precise refinement, finishing work and delicate correction of gel, acrylic and polygel nails.
Professional Lnail carbide cone bit Ø7.0 mm with coarse long cut and WL 15.0 mm for intensive removal, correction and shaping of artificial nail material.
