The KMIZ Carbide Cone Bit Ø4.0 mm Medium Cross Cut WL 13.0 mm is designed for professional processing of gel, acrylic, polygel and other artificial nail materials.
The combination of the cone shape, Ø4.0 mm diameter, medium cross cut and 13.0 mm working length provides a practical balance between material removal and controlled handling.
The medium cross cut is suitable for regular correction procedures and provides even material reduction without the stronger action of a coarse cutting grade.
The bit can be used to reduce artificial material thickness, remove excess product, correct nail architecture, shape the surface and smooth transitions.
The cone shape gradually narrows toward the tip, making it suitable for both broader areas and more precise work on transitions and smaller zones.
The Ø4.0 mm diameter offers a useful balance between working surface and precision. The 13.0 mm working length provides a practical active area for professional procedures.
Typical applications include:
-
correction of gel, acrylic and polygel;
-
reduction of artificial material thickness;
-
removal of excess product;
-
shaping artificial nails;
-
smoothing transitions;
-
preparation for finer finishing.
Working speed, rotation direction and pressure should be selected according to the material, procedure and professional technique. Use smooth, controlled movements without excessive pressure.
After every use, the instrument should be cleaned, disinfected and sterilized according to applicable professional hygiene requirements.
